SALE 15% off Madewell Lighting — battery-powered LED towers, built for site. 15% off Madewell Lighting Shop now

Cal. Bracket

A reusable formwork bracket for concrete barrier kerbs. It connects the inner and outer boards so you can set up the inside edge without driving separate pegs into the ground.

Cal. Bracket barrier kerb formwork bracket

How it works

The bracket screws to both formwork boards through preformed holes. It holds the inside board in position without separate ground pegs along that edge. The bracket can be removed during strip-down and reused on a suitable job.

Check the specified kerb profile and securely fix all brackets before pouring. Use the manufacturer’s instructions alongside your project requirements.

Read the installation guide

At a glance

Timber board height
150 mm
Timber board thickness
37 to 39 mm
Fixings
30 mm Tek screws
Manufacture
Australia

Check compatible profiles and drawings

Find the right bracket for your kerb

CB1 and CB2 suit different kerb profiles. If you’re unsure which model you need, send Gabriel your project drawing before ordering.

Cal. Bracket on site

See how contractors use it on real jobs, from setting the formwork to the finished kerb.

Designed by a concreter

Callam “Cal” Collins started Cal Concrete in Wagga Wagga in 2016 and later took the business to North Queensland. He came up with the bracket while looking for a way to avoid pegging every inside board into the ground on barrier kerb jobs. He began trialling the prototype on his own sites.

After Cal died in 2022, his partner Megan carried the idea forward. Today, she continues developing the product and getting it into the hands of concreting crews.

Read the Cal. Bracket story

Talk to our product specialist

Gabriel Lucas

Gabriel Lucas
Cal. Bracket Product Specialist

Gabriel has more than 15 years of experience in concreting, screeding, finishing and concrete reinforcement. He can help you choose the right bracket, check availability or discuss a quote or reseller enquiry.

Send an enquiry